|
Gerald L. Chafin - Rutledge, TN
I am a "do it yourself" guy and am in the process of finishing
my basement. I had already installed the sheet-rock, electrical
boxes, rough wiring. When browsing through a Handyman magazine I
looked in the section, "New products", and read about
"Blind Mark". I ordered one Kit on Friday. You shipped
on same day and I received it on Tuesday. When the came in the afternoon
I had already finished paneling one room.
We immediately started using the "Blind Mark" Kit What
a difference!! In about half the time we (my wife and I) finished
paneling the second room . I wish that I had the "Blind Mark"
Kit before I started with the sheet-rock!! What a difference it
would have made, in time and the elimination of costly errors!!
I would highly recommend this "Tool" to anyone.
Gene Sherman - Riverside, CA
I've just started using your Blind Mark on my "Garage-Mahal"
project and it is FANTASTIC. Not often do I come across a product
that does what is say and does it so well. I've also told my friends.
Jackie Kuhns - Delaware, Ohio
My name is Jackie Kuhns and I am the executive director of Delaware
County Habitat for Humanity. On Sunday we had 20 Ohio Wesleyan University
freshmen on one of our building sites to install drywall. One of
our volunteer crew leaders had your Handyman Blind Mark drywall
tool and it was a hit. It made teaching students the fine art of
hanging drywall so much easier. I'm sure your tool would be a great
success with our ReStore customers who are do-it-yourselfers.
David Zakrwski - Middletown, Maryland
I received the product on Friday. Just in time for the weekend.
I was hanging about 50 sheets of drywall up in my garage. I had
about 20 boxes to cut out. Not only did the bindmark decrease the
installation time, I won't have to use a single oversized wall plate.
The downside of using this product is that it makes my other drywall
jobs look bad. Worth every penny!
Bob Fischer - Rochester, NY
I'm so glad I saw your product in Handy magazine. (I had to contacted
Handy magazine after I misplaced the issue to find you, they quickly
sent me your contact info) I installed 50 sheets of paneling this
week without one mistake and no worries, or measuring.
I messed up and forgot to enter the handy promotional code, but
your product was well worth it's full price.
I was surprised that it has not made it to the local home improvement
stores, (Lowes, Home Depot, Chase Pitkins) Not one of them had heard
of your product.
I'll be sure to use my set for years to come.
Jim Noland - Oxford, Alabama
Ingenious! Using the Blind Mark couldn’t be simpler and takes
all the guess work out of marking off your electrical boxes. Anyone
hanging drywall should get this product. The time you save and the
mess you avoid makes it well worth the purchase. Plus you save on
the spackle and tape that you would have to use on those bad measurements.
Roscoe J. Dodson - Memphis, Tennessee
What a fantastic devise and simple to use. Not having to measure
of use different ways to mark drywall to get precise location of
the electrical boxes, a must have item in a handyman tool box.
Mark F. Tintle - Shady Side, Maryland
At first the suggested price of $29.95 seemed high. But after finding
out how much time the Blind Mark saves, not to mention the costly
mistakes it and prevent, the product payees for itself in no time!
It’s simple to use, and made to last project after project.
Billy Carr - Lancaster, Texas
This product surprised the heck out of me. It worked wonderful.
I was very skeptical at first, but not any more!
Jeff Chin - Fresno, California
Never seen anything like it. Worked Great!
Leonel Figueroa - Bensenville, Illinois
Product is very easy to use any beginner and use it, and come out
with professional results. It saves time. Easy and 123
Lawrence Brown - Susquehana, Pennsylvania
The Blind Wall Kit came at a very opportune time. I was in the middle
of paneling a room with 1/4” 4x8 masonite panels. Now if you
make a mistake in a cutout on drywall you can correct it with spackle,
if you make a mistake on a cutout of paneling you have to live with
it or replace the panel. To insure that it would work, the way I
believed it should, I put the target into a receptacle box, screwed
on a piece of scrap paneling, moved the locator around until it
locked itself in place. Then penciled a line around the locator.
Removed the locator and unscrewed the piece of paneling, cutout
to the line and reinstalled the piece of paneling in the previous
made screw holes. A PERFECT FIT!
Richard Craig - Gulfport, Mississippi
The Blind Mark worked very well, it is a great tool for the home
do-it yourselfer. It made finding the and marking the electrical
boxes a snap, worked perfectly on every box, no oversize holes or
misses
Raymond Graham - Woodland, Pennsylvania
This product is very well suited to be used with new construction
or a remodeling project. I just finished remodeling my camping trailer
using paneling and wallboard, it worked great.
Mary S Hilker - Rio Rancho, New Mexico
It definitely made finding the boxes easier and the hole cutting
more accurate.
Andy Johnson - Worchester, Maine
I would recommend this product to anyone that is doing a home improvement
with drywall. The Blind Mark is real easy to use to mark electrical
or cable boxes. When doing drywall with the Blind Mark no more trying
to measure and hope that you cut out the opening in the right stop.
Very good product for anyone doing drywall.
Linda Stevens - New Ulm, Minnesota
Great Product! Would have saved me a lot of headaches in the past.
Also tried it for transfer lines to different piece of project –worked
great.
James Bounds - Bay City, Texas
Saves time and energy no more missing the box or making more holes
than necessary.
Bradley McCune - Great Bend, Kansas
I was redoing my bathroom and had 5 outlets and switches to make
cut out in drywall for. By using the Blind Mark there was no more
measuring or guessing where to cut the holes in the new wall board
and tile. Work went faster and very accurate. I would definitely
recommend this product for any member putting up new wall board
or other wall coverings.
Jim E Arens - Belle Plaine, Iowa
Blind Mark did a good job of marking where you should cut out. It
took out the guess work, and made it easy and fast.
Charles Frick - Martinez, Georgia
This system was great for an armature to put up sheet rock and not
worry whether you cut the hole for the outlet in the right place.
It was easy to use and is a welcome addition to my tool box.
Dennis L Webner - Sergeant Bluff, Iowa
Performs exactly as described. Simple design, but eliminates time
formerly needed for measuring.
Herman W Traw - Marlow, Oklahoma
The product is excellent in putting up sheet rock. You don’t
have to measure and you have excellent cut outs every time.
Luther J Gakell - Chaunte, Kansas
I recommend the Blind Mark because it really works. I am assisting
with a completing the interior of an 8000 square foot addition to
our church. I found the Blind Mark helpful and let me open the hole
for the electrical boxes with accuracy.
Tyler Knorr - Gastonia, North Carolina
The product is easy to use. It is simple but effective. You have
time to get your material in the proper location unlike the chalk
trick and it does not smear.
Jerry L Slate - Hudson Oaks, Texas
First product of this type I have seen. Sure cuts down on installation
time and are accurate.
Daniel D Guthrie - Towanda, Kansas
I would recommend this product. The strength of the magnets is impressive.
I used the Blind Mark to finish my basement. It worked perfectly
on ½ inch drywall.
Dawn Dunigan - Howell, Michigan
Worked like a charm! The locator centered itself beautifully over
the Target. The magnets are strong enough to connect even over 1inch
drywall (I had to check)
Jeff Satz - Plano, Texas
Easy to use! Just as instructions showed
Jaeson P Mackura - Santa Rosa, California
Help with speeding up job and with more accuracy.
James Allgood - Baskerville, Virginia
It is easy to use and very effective in its application. It does
make the job easier.
Herbert Clark - Niagara Falls, New York
I recommend the Blind Mark because of the time you save marking
for cutouts, no need to measure!
Dominick Turitto - Spotswood, New Jersey
The Blind Mark was a great time saver and easy to use. Time is money.
James W Tanski - Greece, New York
Worked great when I was putting up paneling. The paneling went over
the outlet the first time.
Brian Stanga - Ponchatoula, Louisiana
We were just about to put up more sheet rock in our new shop when
we received the Blind Mark. We had went through the process of cutting
out the out let holes by measuring, sometimes missing the spot slightly.
By using the Blind Mark it made the process simpler and saved time.
My friends were also impressed with the Blind Mark and the simplicity
of the product.
John S Kauchich - Rock Springs, Wyoming
This product is a time saver and is easy to use.
Billy Reynolds - Centerville, Georgia
WORKS GREAT!
Charles Haisch - Polo, Illinois
The Blind Mark wall kit is easy to use and saves time in installing
drywall. It really works well when using a spiral cutter.
Cliff Keller - Pullman, Washington
Great idea! Wish I had this product a long time ago.
R Burdick - Albany, Oregon
Recommend for convenience and extreme effectiveness for the application
|
